 |
|
|
Carolina
Waterworks Floating Dock & Enclosed Dock Float
Shipped From Mt. Pleasant, South
Carolina
CWI offers the most advanced line of
easily installed dock floats with maximum lift
capacity. For the waterfront resident, boaters, and
marinas, the floats are constructed of thick-walled
rotationally molded polyethylene shell that
encapsulates expanded polystyrene- the finest
flotation material available today.
The thick polyethylene shell is
impact resistant and will also resist damage from
marine life. Expanded polystyrene has 1 lb. – 1.5
lbs. density and will pass a 7- day water absorption
test. CWI also have the best warranty in the
business, a full 12 years, and this is your
assurance of quality performance. (Downloadable
Warranty Document). The thick walled
plastic float case is packed with EPS that is
environmentally approved and exceeds all new
government regulations.
|
|
|
|
General
Calculation for buoyancy
| |
| Length
x Width = Square feet of dock |
| Square
feet x 30 lbs = Total buoyancy |
| Divide
total Load by dock float model number |
|
Example:
10' x 20' dock = 200 sq. feet
200 sq. feet x 30 lbs. = 6000 lbs.
6000
lbs./ 1000lb = 6 Model C1000 floats
|

|
|
|
|
|
|
 |
Eagle Floats
Boat Dock Floatation
Shipped From Gravette, Arkansas
The best valued dock floats on the market.
these rotationally molded polyethylene shelled
floats have an encapsulates expanded polystyrene foam core that
passed the Hunt Absorbtion Test. Eagle Floats Meets
or exceeds all Army Corps of Engineers and EPA requirements (Downloadable
3rd party dock floatation
test results.). Eagle Floats also have a 15 year
limited warranty (Downloadable
Warranty Document).
|
|
|

|
|
|

|
|
|

|
|
|

|
|
|
|
Polyflange
® Boat Dock Floats & Enclosed Float Drums
Shipped From Reidsville, North
Carolina
- ONE piece NO SEAM construction
With TEN YEAR WARRANTY against cracking or
splitting of casing.
- "Easy mount" FLANGE
fastening system for easy to attachment
- 1/4" to 3/8" thick flat
top surface
- One piece
blow-molded construction provides maximum strength
and long life.
- Resistant to oil,
gas, and saltwater.
- Resistant to attack
from marine life and animal life.
- Will not crack or
warp from temperature extremes as low as minus 20
degrees F.
- Meets or exceeds all
Army Corps of Engineers and EPA requirements.
- Exterior is
blow-molded from high molecular weight
polyethylene, the only molding process and
material accepted for the manufacture of
automotive fuel tanks.
- Casing is filled
with expanded closed cell polystyrene for
permanent buoyancy.
- Polystyrene fill
meets or exceeds requirements of Hunt Absorbtion
Test.
- No metal parts or
sharp edges.
|
|
|
 |
|